Lesson 6 of 13

Rate Math: Rate Per Mile, Deadhead and Cost Per Mile

The numbers that decide whether a load makes money: all-in rate per mile, deadhead-adjusted rate, the carrier's cost per mile and the minimum rate to accept.

15 min read · simple version first · practice · self-check

By the end of this lesson you can

  • Calculate loaded and all-in rate per mile
  • Account for deadhead in every offer
  • Set a walk-away rate from the carrier's cost per mile

Start here

The simple version

Think of it like this: If you sell lemonade for $1 but each cup costs you $1.20 to make, you lose money on every cup. Trucks work the same way: the pay per mile must be more than the cost per mile.
  1. Rate per mile is how much the load pays for each mile.
  2. Cost per mile is how much the truck spends for each mile: fuel, repairs, insurance and more.
  3. Count the empty miles too, not just the loaded miles.
  4. If pay per mile is more than cost per mile, the truck makes money.

Words to know

Rate
How much the broker pays for the load.
RPM (rate per mile)
The rate divided by the miles.
CPM (cost per mile)
What it costs to run the truck for one mile.
Walk-away rate
The lowest price you will say yes to. Below it, you say no.

Got the idea? The full lesson below goes step by step, with real examples, practice and checklists.

The three numbers

Every load decision comes down to three numbers: what the load pays per mile, what the truck costs per mile, and how many miles you're really running, including deadhead.

Rate formulas
NumberFormula
Loaded RPMAll-in rate ÷ loaded miles
True RPMAll-in rate ÷ (loaded miles + deadhead miles)
Cost per mile (CPM)All the truck's costs for a period ÷ all miles driven in that period
Profit on the loadAll-in rate − (total miles × CPM) − dispatch fee − factoring fee

A worked example

Example numbers only, to show the math. A load pays $2,500 all-in for 1,000 loaded miles, and the truck is 100 miles away from the pickup. The carrier's cost per mile is $1.80. The dispatcher charges 5% of the rate.

Worked example (example numbers)
StepMathResult
Loaded RPM$2,500 ÷ 1,000$2.50
True RPM$2,500 ÷ 1,100$2.27
Truck cost1,100 × $1.80$1,980
Dispatch fee5% × $2,500$125
Profit before factoring$2,500 − $1,980 − $125$395

The posted $2.50 looks good, but on true miles it's $2.27 and the carrier keeps $395 on a two-day load. A $2.20 load with no deadhead might pay the carrier more. Always quote and compare on true RPM.

Knowing the carrier's cost per mile

Ask every carrier for their cost per mile. Many owner-operators have never worked it out; helping them do it is one of the most valuable things you can do. Costs fall into two groups:

  • Fixed costs (paid even when the truck sits): truck and trailer payments, insurance, permits and registrations, ELD and load board subscriptions, phone.
  • Variable costs (rise with miles): fuel, maintenance and tires, tolls, driver pay if the carrier has drivers, factoring and dispatch fees.

Our free cost per mile calculator works out CPM, break-even and minimum rate, including deadhead, dispatch and factoring fees. See also what's a good rate per mile and what deadhead really costs.

Setting a walk-away rate

Agree with each carrier on a minimum true RPM below which you won't book without asking them. Base it on their CPM plus the profit margin they need. Then you can negotiate with confidence: you know the number you can't go under.

Practice scenario

Should you take this load?

Example numbers. A load pays $1,950 all-in for 820 loaded miles. The truck is 60 miles from pickup. The carrier's cost per mile is $1.75 and their walk-away rate is $2.10 per true mile. Your fee is 5% of the rate.

Your turn:

  1. What is the loaded RPM and the true RPM?
  2. What does the carrier keep after truck costs and your fee?
  3. Does it meet the walk-away rate?
Think it through, then show the model answer
  1. Loaded RPM: $1,950 ÷ 820 ≈ $2.38. True RPM: $1,950 ÷ 880 ≈ $2.22.
  2. Truck cost: 880 × $1.75 = $1,540. Fee: 5% × $1,950 = $97.50. Carrier keeps about $1,950 − $1,540 − $97.50 = $312.50 before factoring.
  3. Yes: $2.22 per true mile is above the $2.10 walk-away rate. Still check the reload out of the destination before booking.

Common mistakes

  • Comparing loads on loaded RPM and ignoring deadhead.
  • Not knowing the carrier's cost per mile.
  • Forgetting dispatch and factoring fees in the profit math.
  • Never updating the walk-away rate when fuel prices move.

Load decision worksheet

Fill in before every booking.

All-in rate: $___
Loaded miles: ___  Deadhead miles: ___  Total: ___
Loaded RPM = rate ÷ loaded = $___
True RPM = rate ÷ total = $___
Truck cost = total miles × CPM ($___) = $___
Fees (dispatch ___ + factoring ___) = $___
Profit = rate − truck cost − fees = $___
Walk-away rate: $___  → Book? Y / N

Key takeaways

  • Compare loads on true RPM: all-in rate divided by loaded plus deadhead miles.
  • Know each carrier's cost per mile and agree a walk-away rate in advance.
  • Profit = rate − (total miles × CPM) − fees. Run it on every load.

Check yourself

Answer in your head first, then tap to compare.

1. Load A: $1,800 for 700 loaded miles, 50 deadhead. Load B: $1,700 for 650 loaded miles, 0 deadhead. Which pays more per true mile?

A: $1,800 ÷ 750 = $2.40. B: $1,700 ÷ 650 ≈ $2.62. Load B pays more per true mile.

2. Which costs does the truck pay even when parked?

Fixed costs: truck and trailer payments, insurance, permits and subscriptions.

3. A carrier's costs were $12,600 last month over 6,000 total miles. What is their CPM?

$12,600 ÷ 6,000 = $2.10 per mile.

Free THC tools for this lesson

Official sources

General information, not legal or tax advice. Rules change; confirm your situation with the agency or a professional.